SCAN 303 has been designed to remove fast light to medium scale deposits which lead to energy consumption
without damaging iron, copper, aluminium and wood etc. And due to its unique properties, 
SCAN 303 is broadly well-suited for providing cleaning solution to the problem of adequately maintaining water-
based cooling condensers, cooling towers, boilers, thermal-
conductivity of hydrothermal or cooling equipment, surface regeneration, mold-casting and similar equipment for 
efficient operation.

Typical properties

-  Formulation: organic-acidic corrosion inhibitor and dispersion agent of scale deposit

-  Appearance : white powder

-  Std. cleaning concentration : required 10% of water content of reservoir

-  Std. cleaning time : in 3 hr - 5 hr

-  Std. cleaning temperature : 60 ℃

-  pH (1% solution) : 1.3

Characteristics

-  Offers easy work with low toxic and doesn't produce a harmful gases like

        hydrochloric acid gas.

-  Can be done in a short cleaning time by dispersing the scale and deposits.

-  Provides good chemical stability for the basic material with strong corrosion inhibitors.

-  Can be also processed at ambient temperature and provides good workability due to

         minimum suspension of the operation.

How to use

-   Input by 10% density about the retained water amount.

-  When do not operate device, do to do circulation driving during 3 - 5 hours.

-  Clean cleanly in Fresh water after discharge.

Handling & Storing

-  Put mask and rubber gloves and avoid contact with human body formation.

-  In case came into skin or eye mouth, wash enough in flowing water.

-  Shut tightly and keep except when use.

Package unit

-  25kg CAN